256 research outputs found
Raising awareness for water polution based on game activities using internet of things
Awareness among young people regarding the environment and its resources and comprehension of the various factors that interplay, is key to changing human behaviour towards achieving a sustainable planet. In this paper IoT equipment, utilizing sensors for measuring various parameters of water quality, is used in an educational context targeting at a deeper understanding of the use of natural resources towards the adoption of environmentally friendly behaviours. We here note that the use of water sensors in STEM gameful learning is an area which has not received a lot of attention in the previous years. The IoT water sensing and related scenaria and practices, addressing children via discovery, gamification, and educational activities, are discussed in detail
Anomalous yielding in the complex metallic alloy Al13Co4
The single crystal deformation behaviour of orthorhombic Al13Co4 hasbeen studied below the brittle-ductile transition temperature observedin bulk material from room temperature to 600 degrees C, usingindentation, microcompression and transmission electron microscopy. Atroom temperature, slip occurred most easily by dislocation motion on the(0 0 1)[0 1 0] slip system, as observed in the ductile regime at hightemperatures. However, as the temperature was increased towards 600degrees C, the slip pattern changed to one consisting of linear defectsrunning perpendicular to the loading axis. Serrated flow was observed atall temperatures, although at 600 degrees C the magnitude of theserrations decreased. Anomalous yielding behaviour was also observedabove 226 degrees C, where both the yield and the 2\% flow stressincreased with temperature, almost doubling between 226 and 600 degreesC. It has been suggested that this might arise due to the increasingstability of orthorhombic Al13Co4 with respect to the monoclinic formwith increasing temperature. This is shown to be consistent with thetheoretical predictions that exist
The perceived barriers to the inclusion of rainwater harvesting systems by UK house building companies
This work investigates the barriers that exist to deter the implementation of rainwater harvesting into new UK housing. A postal questionnaire was sent to a selection of large, medium and small house-builders distributed across the UK. Questions were asked concerning potential barriers to the inclusion of rainwater harvesting in homes separated into five sections; (1) institutional and regulatory gaps, (2) economic and financial constraints, (3) absence of incentives, (4) lack of information and technical knowledge, and (5) house-builder attitudes. The study concludes that although the knowledge of rainwater systems has increased these barriers are deterring house-builders from installing rainwater harvesting systems in new homes. It is further acknowledged that the implementation of rainwater harvesting will continue to be limited whilst these barriers remain and unless resolved, rainwater harvesting's potential to reduce the consumption of potable water in houses will continue to be limited
Precision mass measurements of magnesium isotopes and implications on the validity of the Isobaric Mass Multiplet Equation
If the mass excess of neutron-deficient nuclei and their neutron-rich mirror
partners are both known, it can be shown that deviations of the Isobaric Mass
Multiplet Equation (IMME) in the form of a cubic term can be probed. Such a
cubic term was probed by using the atomic mass of neutron-rich magnesium
isotopes measured using the TITAN Penning trap and the recently measured
proton-separation energies of Cl and Ar. The atomic mass of
Mg was found to be within 1.6 of the value stated in the Atomic
Mass Evaluation. The atomic masses of Mg were measured to be both
within 1, while being 8 and 34 times more precise, respectively. Using
the Mg mass excess and previous measurements of Cl we uncovered a
cubic coefficient of = 28(7) keV, which is the largest known cubic
coefficient of the IMME. This departure, however, could also be caused by
experimental data with unknown systematic errors. Hence there is a need to
confirm the mass excess of S and the one-neutron separation energy of
Cl, which have both come from a single measurement. Finally, our results
were compared to ab initio calculations from the valence-space in-medium
similarity renormalization group, resulting in a good agreement.Comment: 7 pages, 3 figure
Breakdown of the Isobaric Multiplet Mass Equation for the A = 20 and 21 Multiplets
Using the Penning trap mass spectrometer TITAN, we performed the first direct
mass measurements of 20,21Mg, isotopes that are the most proton-rich members of
the A = 20 and A = 21 isospin multiplets. These measurements were possible
through the use of a unique ion-guide laser ion source, a development that
suppressed isobaric contamination by six orders of magnitude. Compared to the
latest atomic mass evaluation, we find that the mass of 21Mg is in good
agreement but that the mass of 20Mg deviates by 3{\sigma}. These measurements
reduce the uncertainties in the masses of 20,21Mg by 15 and 22 times,
respectively, resulting in a significant departure from the expected behavior
of the isobaric multiplet mass equation in both the A = 20 and A = 21
multiplets. This presents a challenge to shell model calculations using either
the isospin non-conserving USDA/B Hamiltonians or isospin non-conserving
interactions based on chiral two- and three-nucleon forces.Comment: 5 pages, 2 figure
The surface science of quasicrystals
The surfaces of quasicrystals have been extensively studied since about 1990. In this paper we review work on the structure and morphology of clean surfaces, and their electronic and phonon structure. We also describe progress in adsorption and epitaxy studies. The paper is illustrated throughout with examples from the literature. We offer some reflections on the wider impact of this body of work and anticipate areas for future development.
(Some figures in this article are in colour only in the electronic version
Near-infrared rechargeable glass-based composites for green persistent luminescence
The fabrication of Yb3+, Tm3+ co-doped oxyfluorophosphate glass-based composites, with green persistent luminescence after being charged with near-infrared light, is demonstrated. The mechanism responsible for the green afterglow after near-infrared illumination is unveiled. The composite is prepared using a modified melting process to limit the evaporation of fluorine during melting. Intense (blue and ultraviolet) up-conversion emission is obtained by optimizing the Yb2O3 and Tm2O3 concentrations. A heat treatment promotes volume precipitation of Yb3+, Tm3+ co-doped CaF2 crystals. Although the intensity of the blue up-conversion emission from the Tm3+ 1G4 level is lower in the highly Yb3+-concentrated glass-ceramic due to reverse energy transfer from Tm3+ to Yb3+, the heat treatment leads to an increase of the intensity of the emissions around 346 nm, 361 nm nm and 450 nm coming from the Tm3+ 1I6 and 1D2 levels. By combining the Yb3+ and Tm3+ ions with SrAl2O4:Eu2+,Dy3+crystals, green afterglow can be obtained after charging with near-infrared light.</p
Near-infrared rechargeable glass-based composites for green persistent luminescence
The fabrication of Yb3+, Tm3+ co-doped oxyfluorophosphate glass-based composites, with green persistent luminescence after being charged with near-infrared light, is demonstrated. The mechanism responsible for the green afterglow after near-infrared illumination is unveiled. The composite is prepared using a modified melting process to limit the evaporation of fluorine during melting. Intense (blue and ultraviolet) up-conversion emission is obtained by optimizing the Yb2O3 and Tm2O3 concentrations. A heat treatment promotes volume precipitation of Yb3+, Tm3+ co-doped CaF2 crystals. Although the intensity of the blue up-conversion emission from the Tm3+ 1G4 level is lower in the highly Yb3+-concentrated glass-ceramic due to reverse energy transfer from Tm3+ to Yb3+, the heat treatment leads to an increase of the intensity of the emissions around 346 nm, 361 nm nm and 450 nm coming from the Tm3+ 1I6 and 1D2 levels. By combining the Yb3+ and Tm3+ ions with SrAl2O4:Eu2+,Dy3+crystals, green afterglow can be obtained after charging with near-infrared light.publishedVersionPeer reviewe
- …